Loft conversion specialists covering High Salvington and the wider Worthing area. We design and build dormer, hip-to-gable, Velux, mansard and L-shape conversions on homes of every age and size, with in-house architectural support built into every project. Contact us for a free, no-obligation quote on your High Salvington loft conversion.
Thinking about a loft conversion in High Salvington? Apex designs and builds them right across this hilltop part of Worthing and the wider BN13 area, a short run from our base. High Salvington sits on the high ground at the north-western edge of the town, on the sea-facing upper slopes below the Downs, so many homes here enjoy a real outlook south over the town and the sea. It sits within Worthing Borough, so applications go to the council rather than the National Park Authority, and we handle the work from design and structural drawings through any planning application to the finished build, so you are not left coordinating separate trades yourself.
The elevated position shapes the practical side of the job as much as the design. Homes on the higher, more exposed plots need scaffolding and roofing sequenced with the weather in mind, and a new roofline on high ground is more visible across the wider landscape, so it is worth getting the form right early. A good number of the properties here are detached houses and bungalows, and on a bungalow a conversion often means adding a full upper floor, which is one of the most rewarding ways to gain space and make the most of the view.
As local loft conversion builders, we take a joined-up approach from the first drawing to the finished room. Our in-house architectural support keeps design, planning and build under one roof, and we build to current Building Regulations throughout. We start with a free, no-obligation site visit and tell you straight what your roof can deliver. Contact us for a free quote on your High Salvington loft conversion.
The right loft conversion for your High Salvington home depends on the roof type, the amount of extra space you want, and whether you are open to altering the external roofline. Five main conversion types are used across the neighbourhood and the wider Worthing area. Because so many homes here sit high on the slope with an outlook to make the most of, the way the finished roof captures the view and reads across the landscape is worth thinking about early, and we will recommend the right approach for your property after the first visit.
One of the most useful options on High Salvington’s detached homes and bungalows, and often the way a bungalow gains a proper upper floor. A dormer projects outward from the existing roof slope to create standing headroom and usable floor area where the original roof sloped in, and on an elevated plot a well-placed dormer can also open up the outlook. On many suburban homes here a rear dormer may fall under permitted development, though the exposed hilltop position can make its size and finish worth checking early. The space gained varies from home to home.
Well suited to the hipped-roof detached homes and bungalows found across High Salvington, where the side of the roof currently slopes inwards rather than rising to a vertical wall. A hip-to-gable conversion rebuilds that sloping side up to a full gable and opens up internal volume, and it is often paired with a rear dormer where the original roof profile is tight. On a prominent hilltop plot, the way the new gable sits against the skyline is worth getting right at design stage. Exact layouts depend on the property.
The least invasive option, and a good fit in High Salvington where the roof already has generous height or where you would rather keep the external profile unchanged on an exposed, visible plot. The existing roof stays as it is: we strengthen the structure, insulate, board the floor and fit rooflights for daylight, and on the higher ground a well-placed rooflight can frame a striking view. Planning permission is rarely required for a rooflight conversion, which can make it a straightforward route to extra space.
The most transformative of the five conversion types. A mansard rebuilds the rear (or sometimes front) roof slope to near-vertical to create maximum floor area and headroom, and full planning permission is almost always required. It is less common on a standard suburban home than a dormer or hip-to-gable, and on a prominent elevated plot the scale of the change is worth confirming with Worthing Borough Council and a planning consultant before committing.
Suited to homes with a two-storey rear outrigger, the “side return”, which appear among some of the older houses in the neighbourhood. An L-shape conversion adds a dormer to both the main roof and the rear outrigger, creating an L-shaped upstairs layout. It is often the sensible middle ground for a property that wants more than a standard dormer without the planning complexity of a full mansard.
Every High Salvington home is different, and the best loft conversion is the one that works with the existing structure to deliver the most usable space. We design around your roof rather than from a standard template, checking ridge height, head heights at the walls, chimney breast positions and staircase landings before proposing a layout. On the elevated plots common here, we also look at how the new floor can make the most of the outlook and how the finished roofline will read on the skyline, so the design earns its place as well as its space. You will leave the first visit with a clearer view of what the loft could deliver.
Worthing is our base, and High Salvington is a short run up onto the high ground at the edge of town, well inside our regular working area. We are familiar with the general planning environment across the BN13 postcode, and used to the practicalities of building on exposed, elevated hillside plots, where scaffolding, access and the weather all need a little more planning. You get a local team on site, consistent standards throughout the build, and a crew that respects the home they are working in.
Our team and specialist partners focus on a finish that stands up to close inspection: plumb walls, flush trims, clean plaster lines, and joinery finished to a high standard. Work is carried out to current Building Regulations, and we coordinate with your Building Control inspector at the relevant stages of the build. Examples of completed work are shown in the gallery below, and we are happy to walk through project details and references at the first site visit.
A typical High Salvington loft conversion runs through six stages. We are involved from initial design through to the finished build via our trusted architectural partners, while some legal responsibilities (Party Wall notices, listed building consent, Building Control submission) remain the homeowner’s and should be discussed directly with a surveyor, architect or the council.
The first step is a free visit to your High Salvington home. We measure up, look at the roof structure, check head heights and ridge clearance, and talk through what the space could realistically deliver, including how an elevated plot and the outlook affect the options. There is no cost and no obligation to proceed.
If you already have drawings we will work from those. If not, our trusted architectural partners can handle the design phase, including layout planning and technical drawings, so you get a joined-up approach from the start. Alongside the drawings we produce a detailed quote and a proposed build programme.
High Salvington sits within Worthing Borough, so where a planning application or Lawful Development Certificate is needed it goes to Worthing Borough Council through the Adur & Worthing shared planning service, and our architectural partners can help prepare and submit it on your behalf. Because the neighbourhood sits on the Downs-facing edge of the town, it is worth checking that a property near the boundary does not fall inside the National Park, as that would change which authority handles the application. We would always recommend confirming the planning position for your property directly with the council, and discussing any Party Wall requirements with a surveyor or architect before the build starts. Party Wall notices are the homeowner's legal responsibility and cannot be served by the builder.
On-site construction begins once the consents, drawings and structural calculations are in place. Timescales vary considerably depending on the conversion type and the property, and we will set out an indicative programme at quote stage. The opened roof is kept weatherproof throughout, and on the more exposed hilltop plots we plan scaffolding and deliveries around the weather to keep the build moving and disruption to neighbours to a minimum.
Building Control inspections are booked in by you (through your local authority or an approved inspector you appoint) at the relevant stages of the build. We build to the current Building Regulations throughout and coordinate with whoever you have appointed so the right stages are inspected at the right times.
Once the final inspection has been signed off on your side, we hand the finished loft over. You will want to keep the completion certificate and related documentation with your property records for any future sale.
A selection of recent loft conversion projects completed across High Salvington, the wider Worthing area and the surrounding West Sussex Downs and coast, spanning a range of conversion types and property ages. If you would like to see more examples of work near your property, get in touch and we will share relevant projects.
The notes below are general context for High Salvington homeowners considering a loft conversion and don’t constitute legal advice. Always confirm the position for your property with Worthing Borough Council, and where relevant with an architect, planning consultant or party wall surveyor, before any work starts.
Planning authority. High Salvington sits within Worthing Borough, so planning applications are handled by Worthing Borough Council through the Adur & Worthing shared planning service, not by the National Park Authority.
South Downs National Park. The suburb sits on the high ground just outside the Park, but the boundary runs close along the Downs-facing edge, so the South Downs National Park Authority deals with anything on land that falls inside it, and a roofline on this elevated position can attract more attention for how it reads in the wider landscape.
Permitted development. With no conservation area over its residential streets, many conversions here proceed under permitted development, subject to the usual limits and to any Article 4 Direction, with a Lawful Development Certificate worth obtaining for your records.
Listed buildings. The neighbourhood’s best-known landmark is its restored windmill, but residential listed buildings are few, and where a property is listed, listed building consent is separate from planning permission and both may be needed.
Party wall. On terraced and semi-detached homes, serving any Party Wall notice is the homeowner’s legal responsibility and cannot be done by the builder.
Apex is based in Worthing and covers High Salvington and the surrounding neighbourhoods, including Findon Valley, Durrington, Offington and Broadwater, along with the village of Findon a little further north. High Salvington is a short run from our base, which keeps site visits easy to arrange and the build straightforward to run.
The first step is a free site visit. We measure up, assess the roof structure and head height, and talk you through realistic options, including how an elevated plot and the outlook affect what is achievable. From there our trusted architectural partners can handle drawings and any planning application, and you will want to confirm the planning position for your property directly with Worthing Borough Council before the build starts.
Apex works on loft conversions across Worthing, Brighton & Hove and the wider West Sussex coast. The pages below give a closer look at
the housing, planning and conversion types we see in each area. If your town or village isn’t listed, we likely still cover it, get in
touch for a quick check.
Common questions from High Salvington homeowners considering a loft conversion. If yours isn’t covered, get in touch through the contact form and we’ll be in touch with an answer.
Timescales vary considerably with the conversion type, the size and condition of the property, and the consents involved. Simpler rooflight conversions are generally the quickest, while dormer, hip-to-gable, L-shape and mansard builds take progressively longer, and adding a full upper floor to a bungalow is a larger job than a straightforward loft. Alongside the on-site build you will need to allow time for architectural drawings, structural calculations and, where required, planning approval. On the more exposed hilltop plots, sequencing scaffolding around the weather can add a little to the programme. We will give you a realistic timeline for our part of the work at quote stage, and your architect or planning consultant will be best placed to estimate the design and consent phase.
It depends on the details of your property. High Salvington sits within Worthing Borough and has no conservation area over its residential streets, so many loft conversions here can proceed under permitted development, subject to the national rules on volume, position and listed-building status, though it is always worth confirming, as an Article 4 Direction or a property’s listed status can change that. Because the neighbourhood sits on the Downs-facing edge of the town, it is also worth checking that a property near the boundary does not fall inside the South Downs National Park, as that would change which authority handles an application. Where a planning application or Lawful Development Certificate is needed, our trusted architectural partners can prepare and submit it on your behalf, and we would always recommend confirming the position for your specific property directly with Worthing Borough Council. Building Regulations apply to every loft conversion and are separate from planning.
In most cases, yes. Once the roof is opened up it is kept weatherproof, and most of the build takes place above the existing first-floor ceiling. You should expect some noise and dust at various points, but it is usually practical to stay in the house throughout. Steel installation and the staircase cut-through are typically the most disruptive stages, and we will flag both in advance so you can plan around them. Converting a bungalow into a two-storey home is more involved, and we will talk through what living on site through that work looks like before it starts.
Industry research has long suggested that a well-built loft conversion can add meaningful value to a home, though the actual uplift varies with the property, the local market and the quality of the finish. In High Salvington, buyer demand is shaped by the elevated position, the outlook over the town and sea, and the open downland close by, so additional bedroom or bathroom space, and especially a new upper floor that makes the most of the view, is generally well received. That is particularly true for families and downsizers who want to stay on the hill rather than move away. For many homeowners, adding a room upstairs also removes the immediate pressure to move within a tight local market.
As a general guide, you will typically need a floor-to-ridge height of around 2.2 to 2.3 metres for a loft conversion to be viable, measured from the top of the existing ceiling joists to the underside of the roof ridge. Where head height is tight, a dormer or mansard can sometimes create the usable room, while a rooflight conversion generally requires the existing height to already be sufficient. A single-storey bungalow may need a raised roof or a full upper floor rather than a conventional loft, which we would talk through at the visit. Head height is one of the first things we check during the free site visit, and we will be honest with you about what is achievable before any design work begins.
The right loft conversion depends on your roof shape, the amount of space you want to gain, and whether you are open to altering the external roofline. As a broad steer, the detached homes and bungalows across High Salvington often suit a dormer or a hip-to-gable, frequently paired together on a bungalow to create a full upper floor; a rooflight conversion works well where headroom is already generous or where keeping the profile unchanged on a visible plot matters, and can frame the view nicely; and the older homes with a rear outrigger may suit an L-shape. We will recommend the best option for your specific property at the free site visit.
Yes. Every loft conversion in the UK needs to meet the Building Regulations, regardless of whether planning permission is required. The regulations cover structural stability (often requiring steel beams and reinforced floor joists), fire safety (escape routes, fire doors, smoke alarms), staircase design and headroom, thermal insulation, and sound insulation between the new rooms and the rest of the house. Building Control submission and inspections are the homeowner’s responsibility, either through the local authority or through an approved inspector you appoint. We build to the relevant standards throughout and coordinate with whoever you have appointed so the right stages are inspected at the right times.
